1. Preparation of MR™ Series
 |
Mix MR™ monomer (component) A & B with additives, then degas the MR™ monomer mixture. |
2. Filling
 |
Fill molds with the MR™ monomer mixture. |
3. Polymerization
 |
Place the filled molds into ovens, where they undergo a heat-cycle, turning the MR™ monomer mixture into a MR™ lens. |
4. Grinding / Polishing
 |
Grind and polish the surface of the MR™ lens to create a curvature for required strength. |
5. Tinting
 |
Tint the surface of the MR™ lens. |
6. Coating
 Hard Coating  Anti Reflection Coating |
Coat the surface of the MR™ lens to protect from scratches, reflection etc. |
7. Final Inspection
 |
Inspect the coated lens. |
