Acrylic resin and polyurethane resin for coating

Usage detail

Urethane coating resins for paint, printing ink, paper, etc.

  • Basic information
  • Details of Characteristics


OLESTER™ is an urethane resin and is used for wide range of coating uses. OLESTER™ has excellent characteristics in terms of water resistance, abrasion resistance, high flexibility and chemical resistance.

OLESTER™ RA type (UV curing type resin)

OLESTER™ RA can be used for the instantaneous speed curing (for few seconds), and has resource-saving characteristics (higher non-volatile and lower energy consumption).

OLESTER™ Q type (acrylic polyol)

OLESTER™ Q type is an acrylic polyol for two-pack type polyurethane coating.

OLESTER™ UD type (water-borne polyurethane resin)

OLESTER™ UD type has fast dry-to-handle properties (set to touch: 5 min., thorough drying: 30 min.) which are superior to solvent type polyurethane resins.

OLESTER™ UD type is better abrasion resistance than the humidity curing type polyurethane resin, and it is nonflammable and has a non-odor solution. It can be used both for clear coating and for the enamel coating of paints for woods, metals, plastics, inorganic materials and many other materials.

Grades and physical properties

RA type (UV curing type resin)
RA type (UV curing type resin)
Q type (acrylic and polyester polyol)
Q type (acrylic and polyester polyol)
UD type (water-borne polyurethane resin)
Yellowing type
UD type (water-borne polyurethane resin):Yellowing type

Contact Us

Coatings & Engineering Materials Division